Tag: drilling rig solids control system

2000HP Drilling Rig Solids Control System for Indian Drilling Company

Recently one set of 2000HP Drilling Rig Solids Control System for Indian Drilling Company, this is the repeat order from the drilling company, they already purchased one set of 3000 HP rig solids control system. The features of the 2000HP rig solids control system including:


1. Single mud tank modular is interchangeable for both 2000HP mud tank system and 3000HP mud tank system, which allow the client to use it flexible for different projects.
2. The solids control equipments are interchangeable for both 2000HP solids control system and 3000HP solids control system, including the voltage/frequency/model/specifications, so the client can replace them if required.
3. The cable wiring connection and design is also interchangeable for both system.


The technical configuration of the 2000HP rig solids control system is as below:
1. Mud gas separator GNZYQ1200A, 1 ea
2. Drilling fluids shale shaker GNZS594K, 3ea
3. Vacuum degasser GNZCQ270B, 1ea
4. Linear motion mud cleaner GNZJ594K-2S12N, 1ea


5. Mud mixing skid, including 2ea mixing hopper, 1 ea jet shearing unit and 2ea of 100HP mixing pump , which is connected to mud tank, it can suck from any compartment to mix the drilling fluids and also discharge to any of the compartment.
6. Mud tank system with pipelines, accessories, fittings, including shaker tank, intermediate tank, suction tank, trip tank, pre-flush tank, 3ea reserve tank, 3ea water tank, the total volume can meet the client’s requirement.
7. feeding pump of Desander, desilter , 2ea
8. Decanter centrifuge with feeding pump


9. Mud agitator and mud gun with proper model and qty for all the mud tanks to meet the requirement
10. Lightings and ATEX explosion proof electrical control system for the whole solids control system
If you need a good quality, good performance drilling rig solids control system, pls contact with GN solids sales.

GN Solids 750HP Workover Rig Solids Control System for China Oilfield Service Company

Recently one set of 750HP Workover Rig Solids Control System are ready for delivery to China oilfield service company.
The typical features of 750 HP rig including:

1.Compact Layout: Designed for skid-mounted or trailer-based mobility.
2.Automation: Modern systems may include PLC controls for optimized performance.
3.Adaptability: Handles oil based mud (OBM), water based mud (WBM), and synthetic based mud (SBM).
The solids control system including the items below:


1) One set of mud tank system, customized dimension as client’s requirement, including shaker tank, mixing tank, trip tank, each tank equipped with mud agitator, mud gun, lightings, mud tank accessories.
2) 2 sets of drilling fluids shale shaker GNZS594K, GNZS594K shale shaker is the lastest version linear motion shale shaker produced by GN solids control, it is a 4 panel shale shaker installed 4pcs of 585x1165mm composite material frame shaker screen. The shale shaker is drived by 2ea 2.6HP vibration motors, the max G force is 7.5G and it is adjustable.
3) 1 set of mud cleaner GNZS594K-2S12NK, it is desander, desilter, shale shaker 3 in 1 combination mud cleaner, the 10 inch desander cone qty is 2ea, the 4 inch desilter cone qty is 12 ea, the treating capacity of the mud cleaner is 1000gpm, 2ea centrifugal pumps are installed on the tank skid as feeding pump of the desander cone and desilter cone.


4) 1 set of middle speed decanter centrifuge GNLW452D, it has been widely used for barite recovery. If you need to separate the low gravity solids further, we can use GNLW363 or GNLW363-VFD decanter centrifuge.
5) Centrifugal pumps, mud agitator, mixing hopper, mixing pump, electric control system, etc.
If you need a customized design and high quality high performance drilling rig solids control system, pls contact with GN solids control for more information.

1000HP Drilling Rig Mud Tank System for China Drilling Company

Recently one set of 1000HP rig mud tank system are ready for delivery for China drilling company. This is a customized mud tank system according to client’s requirement, the technical configuration is as below:


4 sets of mud tanks with tank accessories, electric control system
Drilling fluids shale shaker: GNZS594K, 2 units , this is the updated model of GNZS594J shale shaker, equipped with 4 panel shaker screens, total screen area is up to 2.73m2, it is drived by 2ea of Italy Oil brand vibration motor, the vibration strength is up to 7.6G and it is adjustable, the deck angle is adjustable mechanically while operation. The shaker screen is also produced by GN solids control which is produced compliant with API RP13C standard.


Mud cleaner: 1 unit of GNZJ594K-2S12N, it is a combination of 2 ea desander cone, 12 ea desilter cone and GNZS594K bottom shale shaker, the treating capacity is 1000gpm.
Vacuum degasser: GNZCQ270, 1 unit
Middle speed decanter centrifuge for barite recovery: GNLW452DS, as one of the professional decanter centrifuge manufacturer in China, GN solids control can produce different size different volume decanter centrifuge, including 9 inch mini decanter centrifuge for solids removal unit waste water treatment; 14 inch bowl decanter centrifuge which can be used for drilling mud treatment, drilling waste treatment, dewatering system, oil sludge treatment system, waste water treatment; 18 inch bowl decanter centrifuge can be used as barite recovery decanter centrifuge, solids control centrifuge, drilling waste treatment system, etc; Also we have big bowl big volume centrifuge such as 22 inch bowl decanter centrifuge, 30 inch bowl decanter centrifuge, three phase decanter centrifuge, etc.


Centrifugal pump: 4 units and Mud agitator, mud gun, mixing hopper, mixing pump, etc.
If you need a customized drilling rig solids control system, pls contact with GN solids sales.