solids control system

The particular solids control system might
remove the large solid contaminants in the drilling mud to minimize the solids
content to ensure that to protect the transferring send that used to transfer
the particular mud back the machine for reusing. GN just simply finished one
set mud solids control system along with VFD
decanter centrifuge
intended for mining project in Southeast Asia.

This system is a two stages separation design product; the equipment
configuration is as beneath:
1 . Shale
shaker
unit GNZS594E-HB used for coarse strong particle separation. This
shale shaker unit could also be utilized as a high G pressure drying shaker
with variable G force up to eight. 4-panel screen makes a more substantial area
for drying often the drilling mud.
2 . VFD design decanter centrifuge system used for fine solids separating. The
first one unit centrifuge operates at a middle speed to eliminate most of the
solids to reduce often the gravity. The following second device VFD control
centrifuge might run at a high speed to get rid of the ultra fine solid waste
to make the drilling mud clean.
3. Screw pump prepared to transfer the dirt to the centrifuge. Horizontally set
up at the flank of the reservoir, it helps to tank leading more space for
operation mobility.
4. Mud cleaner reservoir used as sand pitfall and active mud hard drive.
This system is to remove the sound particles in the drilling soil to make the
drilling fluids using again. After the solids being taken off, the fluids could
be piped back for reuse as well as the pump would be also guarded as there are
less solids dust.
Mud solids control strategy is
very common product and alternative that GN provides. For this reason, GN could
provide parting system used for oil going, no dig drilling task and some other
industrial sturdy and liquid phase separating. For more information, welcome
send you email or call devoid of any hesitate.

Related Posts

image

After a long holiday, which is the longestholiday in China, GN is back to work with full energy. Spring festival is mostimportant festival for every Chinese. After spring festival, according toChinese calendar, the new year starts. GN Solids Control is having a great start full of new orders.

Just before the holiday, GN has dispatched
20 sets of centrifuges to loading port, these centrifuges will arrive to
different countries in Middle East and Africa. In order to finish this order in
time, GN Producing department has been working around clock for at least 50
days.

Among all the equipments used for oil and gas solids control and waste
management
, Decanter Centrifuge could better show a manufacturer’s
capability for producing. Each year, GN produce around 150 sets centrifuges,
and 70% of those are exported.

What Centrifuges does GN produce?

1.      High speed Decanter Centrifuge GNLW363C
series decanter centrifuge
. This is 14 inch bowl decanter centrifuge,
and very popular size and design. For the same model, GN has highest
configuration and economic configuration available. The highest configuration
is suitable for waste management use and also regarded perfect as dewatering
centrifuge. The economic configuration is suitable for separating the fine
particles for solids control system. For each configuration, there are fixed
speed and VFD controlled available.

2.    Middle
Speed Decanter Centrifuge GNLW452, with a 18 inch diameter bowl. In some cases,
it is regarded as big bowl centrifuge. it is perfect in practice for recovery
the barite in solids control system. It has only one motor, and a middle speed
of 1800RPM.

3.      Big
Bowl Decanter Centrifuge GNLW553VFD Centrifuge, with 22 inch diameter bowl, and
71 inch long. It is a bigger sized GNLW363C decanter centrifuge.

4.      Baby
Centrifuge, GNLW223, the bowl diameter is only 9 inch, it is commonly used for
diamond drilling or some mining projects.

Among those above mentioned decanter
centrifuges, GNLW363CG-VFD is the best seller. And it is always used for
drilling waste management systems together with other equipments for further
treating the drilling cuttings from a solids control system. For WBM systems,
they always use high-G dryer shaker, and for OBM
and SBM, they always use vertical cuttings dryer. Both
mentioned extra equipments are available by GN Solids Control. 

May you need more information, pls contact
us freely.

Related Arciels:

image