1500HP Drilling Rig Solids Control System for Africa Project

Recently one package of 1500HP drilling rig solids control system are ready for delivery to Africa project. The technical configuration is as below:

1. Solids control shale shaker GNZS594J-SHBJ, 3 units, each unit with 4 panel shaker screen which is with composite material frame and stainless steel wire mesh 2 or 3 layers by 4 sides pretension.
2. Centrifugal degasser GNZCQ-1200, 1 unit
3. Desander unit GNZJ591J-M2SF, 1 unit , with 2 ea of 10 inch desander cone, the general treating capacity is up to 1000gpm of drilling fluids.
4. Desilter unit GNZJ591J-M16NF, 1 unit, with 16 ea of 4 inch desilter cone, the total treating capacity is up to 1500gpm of drilling mud.

5. Centrifugal pump in different size for different applications, including 5 units of GNSB8x6-14J (75KW) centrifugal pump, 3 units of GNSB8x6-13J (55KW) centrifugal pump, 5 units of GNSB4x3-12J (15KW) centrifugal pump and shear pump GNJBQ6*5-750 (75KW), 3 units of mixing hopper (H)JM-200, these centrifugal pump can be used as transfer pump, trip pump, mixing pump, charging pump, feeding pump.

6. High speed decanter centrifuge GNLW363D-GP, 1 unit, to separate the fine solids from drilling fluids and keep it balancing. The centrifuge is 14 inch bowl diameter with 50 inch bowl length, the max speed is up to 3600rpm and the max G force is 3063G, the separation cut point is 2~ 5microns, if need to separate more fine solids, chemical dosing unit can be used together with the centrifuge by adding chemicals in the inlet tube.
7. Mud agitators installed on the mud tank for drilling mud agitating and mixing, including 7 units of 20HP mud agitator, 2 units of 15HP mud agitator, 1 unit of 7.5HP mud agitator.
8, Customized mud tank system, including active tank, intermediate tank, suction tank, mixing tank,, reserve tank, trip tank,etc.