drilling waste management

Recently GN just sold two decanter centrifuges to a US customer for their project in Canada. The two decanter centrifuges are 22 inches and 14 inches. This is a new project for the soil remediation, which is a new area for the decanter centrifuge application.
As an advanced decanter centrifuge manufacturer, GN’s decanter centrifuges have been sold to more than 60 countries, and after being tested and applied in the job sites, GN’s product performance proved to be reliable and consistent. Now GN can manufacture not only the single solid control equipment, but also the whole cleaning system, such as the shale shaker, decanter centrifuge, mud cleaner, cutting dryer, and various kinds of pumps. All the equipment can work together and combined as an integral part to clean the contaminated soil and water, and make it reusable and environmental friendly. The 22 inch bowl size decanter centrifuge has medium speed to do the coarse separation, the 14 inch bowl size decanter has fast speed to do the finer separation. You can also add a flocculate system to separate even finer solids, the size almost close to zero.


Now all the decanter centrifuges have been upgraded, the bowl material is 2205 stainless steel which is very tough and needs little maintenance. The solid and liquid discharge port material is tungsten carbide, which is tough. The screw conveyor surface is covered by the tungsten carbide tiles, which is replaceable when it is damaged. The bearing is adopted the world famous brand SKF and all the electrical control is also using the world famous ABB or SIMENS, according to customer’s needs and requirement. Now the Canadian customer is very satisfied with the decanter centrifuges and they are using it to do the soil remediation work and water cleaning.


GN welcome you to come to the job site to take a look at the equipment running, you can also log on to www.gnsolidsamerica.com or you can send your inquiries to lucas@gnsolidscontrol.com.

GN Solids Control got another big order recently for providing all the solid control equipment and parts for 16 drilling rigs in Ukraine. This is another great example to demonstrate GN’s manufacturing capability and service ability to provide the good quality solid control products.


Since its establishment, GN has been always devoted to manufacturing high quality product and committed to providing the first grade service to its valued customers, its products covers every aspect of the solid control business in the oil and gas drilling, such as the shale shaker, desander, desilter, mud cleaner, decanter centrifuge, cutting dryer, centrifugal pump, screw pump, jet mud mixer, agitator, various kinds of tanks and systems.


For this Ukraine project, GN provided more than 30 units of shale shakers, more than 30 units of decanter centrifuges, and more than 30 units of mud cleaner, and also provided 6 units of vacuum degasser. This Ukraine plan to fully upgraded its drilling systems, so they purchased a lot of new solid control equipment to meet their new requirement and large volume processing capacity. The decanter centrifuge is a very popular product among all of GN’s product line. Now GN can manufacture the bowl size of the decanter centrifuge from 9 inch to 30 inch, all the bowl material is adopting the advanced 2205 stainless steel. The screw conveyor’s surface is covered with changeable tungsten carbide tiles, which is very tough and easy to maintain. The liquid and solid discharge port also upgraded to the new tungsten carbide, it will last longer and need little maintenance. The decanter centrifuge is also very compact and has small footprint, easily to remove and work in the remote area. The decanter centrifuge can separate the solid size up to 2 to 5 microns. When added some polymer, it can separate the solid size almost to zero. This can meet the most customer’s needs and requirements.
GN will look forward to more business with you, please log on to www.gnsolidsamerica.com or you can send your inquiries to lucas@gnsolidscontrol.com.

GN Solids America now is doing some important modification in their Houston facility. Now they are expanding their warehouse inventory capacity by installing the screen rack and shelf inside the warehouse, after installation, the warehouse inventory capacity could be tripled to more than 6000 pieces of shaker screens. And it will mainly hold 4 types of composite frame shale shaker screens: MONGOOSE, KING COBRA/ VENOM, FLUID SYSTEM, and DERRICK.


Now there is another new 40 feet container coming into Houston, the expected arrival time will be next week. It will be full of MONGOOSE and FLUID SYSTEM shaker screens, all of them are composite frame screens. These screens have many great features, if the screen API above 60, the wire mesh will be rectangular shape and there will be 3 layers of wire mesh. It will dramatically increase the life of the screen. The wire mesh will be much thicker. The screen will be four side pretensioned, which will make the screens layers combined more tightly, this will also increase the longevity greatly. The screen weight will be decreased dramatically, this will increase the safety for the operator on the job site. The non blank area will also increase by 20%, the working hours can reach up to 300-700 hours. But comparing to the OEM screen manufacturers, GN’s replacement screen price can be only 40%-50% of them, this will help the operators save a lot of money, especially in this downturn time of the oil and gas industry.


Except for the shale shaker screens, GN Solids America also stocked about 20 units of solid control equipment, such as the decanter centrifuge, cutting dryer, shale shaker, mud cleaner. If the customer need them, GN could ship them immediately to your job site.
Finally, GN could be your one stop shop for your solid control requirement, welcome to send your inquiries to lucas@gnsolidscontrol.com .

WEFTEC 2017 will be held in Chicago from Oct. 2-4. As the largest water treatment show in North America, WEFTEC will attract all the experts and technicians all around the world to share the technology and expertise for the water treatment and water quality show.


GN solids control is the leading manufacturer in the solid control and waste management equipment. All of its equipment could be used in the water treatment technology to make the water quality meeting the environmental requirement. This year, GN Solids America will be exhibiting in the show for the first time, and it will demonstrate its 223 decanter centrifuge and 752 shale shaker. The booth number is 5622.


GN’s decanter centrifuge is a very mature product and is very popular with many customers. The bowl material is made of the 2205 stainless steel. The liquid and solid discharge port is made of tungsten carbide, which is very tough and endurable. This also needs less maintenance and will save the operators a lot of money. The bearing is made by the world famous brand SKF. It can separate the solid size from 2 to 5 microns. And the equipment is controlled by VFD system which means its processing speed and capacity could be adjusted as the user’s requirement. And this decanter has very small footprint and easy to move, very flexible to work in the remote area.


Another equipment GN will demonstrate is the shale shaker, it could reach the G force up to 8 G. And GN can customize the shaker as the customer’s requirement. GN also can manufacture the most important consumable part, the shale shaker screen. Now GN can not only manufacture its own OEM screen, but also can manufacture all the world famous screens, from API 10 to 400. And all its screens are adopted the advanced composite frame which has many great features. Please inquire us for more details.
We will look forward to meeting you in Chicago. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to lucas@gnsolidscontrol.com.

GN solid control is the world leading company for manufacturing solid control equipment and shale  shaker screens. From the beginning of 2017, GN has started upgrading its shale shaker screen product line, from its own OEM shaker screen, to many replacement screens for many world famous brand, such as the MONGOOSE, KING COBRA/ VENOR, FLUID SYSTEM, etc. Till now, GN can manufacture most of the replacement screens for the world famous brand. The longevity and performance is very similar or even better than the OEM, but the price is much better than the OEM. So that’s why GN is so successful in the shaker screen business in 2017 and will expect to more shaker screen business in the coming 2018.


Except for the good product itself, GN is also continuously issuing many promotional policies. For example, GN recently introduced a new policy called shale shaker screen reward policy, that means if any customer buys the composite frame shaker screen from GN, they can get one point by purchasing one piece of screen, the more you buy, the more points you will get. The points can be accumulated up to 5000, which is equal to USD 15,000. These points could be directly applied to the solid equipment purchase, deducting the purchase price. Among all the GN’s equipment, there are 3 types that will be applicable to the policy, they are shale shaker, mud cleaner and decanter centrifuge. Every time when you use the points to redeem for equipment, the minimum is 1000 points or integral multiple of 1000 points. This policy will last for two years from August 15, 2017. So hurry up, there is no second chance like this that will help you save money and get most out of everything.
If you are interested in this policy and want to know more details about this promotion policy, welcome to log on to GN’s website: www.gnsolidscontrol.com or send email to lucas@gnsolidscontrol.com .