Recently Several packages of vertical cuttings dryer system are ready for shipment to our international clients. One unit of GNCM-40A drilling cuttings treatment system is shipped to Brazil, 2 units of containerized vertical cuttings dryer system is shipped to Russia. The photo is as below:
The technical configuration of GNCM-40A drilling cuttings treatment system is as below:
1) One set of GNCD930 vertical cuttings dryer with flushing pump, its rotation speed is up to 900rpm reach 420G force, we have 0.25mm, 0.35mm and 0.5mm screen basket opening for option.
2) One set of GNLW363D-VFD decanter centrifuge with feeding pump, the max speed is up to 3900rpm, typical speed is 3200rpm, max G force is up to 3063G, it can be used to separate fine solids from the drilling fluids discharged from vertical cuttings dryer.
3) 2 sets of screw conveyor to transfer the drilling cuttings from drilling mud solids control shale shaker to vertical cuttings dryer feeding port, and transfer the separated solids from discharge port to waste container. We provide customized supporting skid for the screw conveyor for our client to install them easily at rig site.
4) Telescopic skid of vertical cuttings dryer and telescopic skid of decanter centrifuge and fluids collection tank are all on the compact skid for convenient transportation and installation.
The technical configuration of containerized drilling waste management system is as below:
One set of vertical cuttings dryer with flushing pump and one set of decanter centrifuge with feeding pump, both of them are installed inside the container to keep the operation warm in Winter, so the drilling fluids will not be frozen in cold weather.
Both of the drilling waste management system are widely used for oil based drilling cuttings treatment or SOBM treatment, if you need solution for drilling waste management, pls contact with GN solids engineer.