One unit of mud cleaner unit and one unit of decanter centrifuge are shipped to international drilling company. The order including one set of mud cleaner installed on the mud tank with 2 centrifugal pump as feeding pump of desander cone and desilter cone, and one unit of mixing hopper, one unit of mixing pump, and one unit of decanter centrifuge.
The decanter centrifuge features including:
- Bowl assy are made of duplex stainless steel 2205 or 2304, the other components of bowl are made of stainless steel 316L, the bowl collection vessel are made of SS304
- The bearing are SKF brand
- The fluids distribution port and solids discharged port are all protectedby tungsten carbide alloy, when it is damaged, it is interchangeable.
- The screw is made of SS304 material by heating treatment to 1000℃, the impeller are protected by tungsten carbide tiles, which is repairable
- We can make different size decanter centrifuge with different bowl size, including 9 inch, 14 inch, 18 inch, 22 inch, 30 inch.
The mud cleaner is a 3 in 1 equipment including desander cone, desilter cone, bottom shaker, the treating capacity is 500gpm, the desander cone separation cut point is 45 microns, the desilter cone separation cut point is 20 microns, the composite material frame shaker screen are installed on the shale shaker with longer working life. The desander feeding pump feed the slurry to desander cone, the clean fluids drop into desander compartment, the desilter feeding pump feed the fluids to desilter cone, the clean fluids drop into the mud tank desilter compartment, the chemicals are adding by the mixing hopper, the mixing pump mix the clean fluids with powders to prepare for new drilling fluids, which can be reused for drilling. If required, the decanter centrifuge can separate fine solids size 2 ~ 5 microns.