Author: gnadmin

Recently, GN production department is busy with drilling waste management systems, because same orders come from different regions of world, one after another. The 3 OBM waste management systems are respectively for Asia, West Africa and Middle East.

This is a standard system with GNCD930C vertical cutting dryer, a hopper shape tank for receiving the liquid from the vertical cutting dryer, and a GNLW363BG-VFD for further treatment of drilling liquid. Solids parts discharged by this system is always buried or made into mud plate before burying.

When designing this system, besides the basic functions, GN engineer team take into consideration lots of factors, even including small details. As below:

1. In GNCD930 vertical cutting dryer, air flushing system adopted for avoiding screen blocking cases.
2. GNLW363BG decanter centrifuge is mounted on a telescopic skid, this skid can offer 3 optional heights for the centrifuge, easier for operator to lead the treated clean liquid back to a reserving tank.
3. Liquid outlet of decanter centrifuge is designed with 2 branches, equipped with valve. One is to the side, in order to transfer liquid into reserving tank. The other is vertical, used for discharge liquid directly, and also helps flushing.
4. GNLW363BG-VFD decanter centrifuge is international high standard decanter centrifuge, with positive pressurized VFD control and high standard material for longer service life and better performance.
5. Tank between vertical cutting dryer and decanter centrifuge is shaped as a hopper, in this condition, solids particles remaining in liquid is adapt to settle down to the smaller bottom. On bottom there is a gate for discharge them on occasions and easy to flush.

Some customers who use WBM only can replace the vertical cutting dryer into a GNZS594HGE high G shale shaker and cost will be much lower.

Pls contact renee@gnsolidcontrol.com for more information, or directly call 008618511893912

Last month, GN Solids Manage has delivered four sets of shale shakers, 1 set of Mud Gas Separator, 1 sets of decanter centrifuge and one hundred ea shaker screens to South America.
These Mud Gas Separator equipments had been ordered by a Latin American consumer in the course of GN Solids America?ˉs attendance in OTC Oil Show which was held in May possibly in Houston. It was the initial time that buyer met GN, but before he came to OTC, he currently heard of GN. He said it was his first order with GN, and he would acquire extra in close to future.
This is not very first time GN Solids Manage supplies its items to South America, but very first time of GN Solids America. GN’s Mud Gas Separator equipments has been working together with solids control and waste management systems in South America for various years, and, mostly in plains, while some in plateaus.
GN Solids Control designs and manufactures Shale Shakers, Mud Cleaners, Decanter Centrifuges which could be applied in oil and gas solids control, CBM, HDD and piling projects mud recycling systems.
Appropriate now GN Solids Control has 1 set of GNLW454 Significant Bowl decanter centrifuge, 2 sets of GNLW363BG high speed decanter centrifuges, two sets of GNLW363BG-VFD decanter centrifuges for sale in GN Solids America warehouse for sale. Apart from above pointed out equipments, GN Solids America also has a compact 500GPM program for CBM or HDD drillings out there in stock.
For those Mud Gas Separator who have interest, welcome to speak to GN Solids Control or GN Solids America for a lot more info.

mud gas separator relevant post:

2000hp rig mud technique of GN

Bentonite Recovery Unit for HDD Drilling Rigs

In a comprehensive closed loop of solids handle program for drilling rig, hydrocyclones combines the second and third stages for separation process. In the course of years of job experiences, the technologies has enhanced, and efficiency gets raised accordingly.
Usually, you’ll find 3 sorts optioned and now are still well-known in action:
1. Desander cones and desilter cones: GNWS-2S, GNWS-12N
This can be a very simple set of desander or desilter. By indicates of centrifugal sedimentation, 2 phase components are separated, the liquid portion goes up and discharged in one particular way, while solids element falls down in an additional way. Benefit of desander/desilter is its compact style, which needs smaller sized footprint and no consumption of shaker screens. But the treated cuttings will not be so dry. That is why this is normally utilised for unweighted mud.
two. Desander/desilter with beneath flow shaker:GNZJ752E-2S, GNZJ752E-12N
Besides the centrifugal sedimentation function offered by hydrocyclones, the desander/desilter with underflow shaker also adopts a shaker for additional drying of cuttings. The solids particles discharged by hydrocyclones fall on the screen and dried by the linear motional shaker. This style like GNZJ752E-2S is greater for weighted mud therapy comparing with GNWS-2S.
3. Mud Cleaner: GNZJ703E-2S/12N or GNZJ594E-2S12N
Here we group mud cleaner into the desander/desilter catalog mainly because its function: 3 in 1 mixture of shale shaker, desander and desilter. The below shaker is employed as drying shaker for solids particles from each desander and desilter. This really is most popular solution for most customers.

GN’s functions for above equipments:
1. Desander/desilter cones, PU material for longer service life
two. For desander/desilter with below flow shaker, it can be easily to take away the hydrocyclones and get a shale shaker. Or interchange desander cones into desilter cones with very same shaker.
three. For shaker parts, GNZJ use popular brand vibration motor for sufficient vibration force and longer life.
four. Complete shaker deck heat remedy to get a stronger structure.
five. Wedge for straightforward changing shaker screens.
6. Shaker deck angle adjustable.
Might you might be in require of above equipments, pls speak to us directly. We’re skilled in giving have to suitable option for the job internet site.

Many internet site pls refer to the related post:

Predecessor Shaker in Direct Field Comparison

USA desander is below to solids control part

GN desander desilter where possible Program available

 

Mud agitator is a compact unit used for the drilling fluids. Not only applied within the mud mixing tank for mixing the drilling fluids using a selection of chemical, but additionally utilized inside the storage tank avoid the sediment.

GN mud agitator is with various explosion for instance ATEX and IE CEX. The motor power is from 3KW(4HP) to 22 KW (30HP) to meet with diverse sorts of density of mud. Based on the distinct deep of mud tank, GN is able to deliver the single, double even the triple impeller in an effort to correctly mix the drilling fluid. Also, there is a really essential info shoppers need to have to provide to us could be the length of shaft. Regard for the length of mud agitator, we are capable of fabricating shaft and installing with stabilizer around the bottom of tank. Technically, the productive working diameter of mud agitator is three meters. On the other hand, the corner of mud tank is want to use the GN mud gun to prevent the mud sediment. So, GN mud agitator and mud gun are basic unit equipped around the mixing tank and storage tank.

Click this link to quote about mud agitator

http://mudcleaner.wordpress.com/2014/04/26/gn-mud-agitator-program-settings/

http://mudagitator.wordpress.com/2014/04/26/gn-mud-agitator-design-in-2014-year/

http://www.drillmudsystem.com/search/Mud+agitator

 

GNSOLIDSAMERICA Can Manufacture Premium Vertical cuttings dryer

As quite a few drilling contractors have organization inside the location and a few drilling contractors don’t take care of the atmosphere, the environment in some portion from the Middle East is very a great deal polluted. So the government requires action against this and waste management is coming. And also the Middle East is becoming a good market place for waste management operations.

Throughout waste management procedure, for oil-based mud, cuttings dryer may be the commonest gear utilised to decrease the oil content of drilling solids. Now one of the most popular cuttings dryer in the Middle East and Venezuela is Swaco VERTI-G Dryer. GNSOLIDSAMERICA now can also manufacture premium vertical cuttings dryer for drilling waste manage.

another part: VERTI-G cuttings dryer

The VERTI-G cuttings dryer is incorporated with a high-speed vertical centrifuge that achieves maximum liquid/solid separation in large-volume processing. This mechanism tends to make the VERTI-G Dryer 1 on the very best and most reliable cutting dryers inside the industry. The VERTI-G Dryer gives operators a crucial benefit in meeting increasingly stringent environmental rules for cuttings disposal.

Application of GNSOLIDSAMERICA Vertical Cuttings Dryer:

The GN Vertical Cuttings Dryer for Water based Mud returns and recycles large proportion SBM ( Synthetic Base Mud ) and OBM ( Oil Base Mud ) towards the purification program, which within the previous was regarded as waste dumped for the surroundings. GNSOLIDSAMERICA Vertical Centrifuge can lower cutting OOC than 6%, the existing discharging limit in a lot of regions with the world, having said that, our goal is to make it decrease than 5%, as well as further.

Capabilities & Benefits of GN Vertical Cuttings Dryer for Water based Mud

1. Efficient solid/fluid separation performance, and able to minimize the drilling fluids content in cuttings as well as reduce the amount of waste to be treated.

2. Effectively separates and recovers larger-proportion drilling fluids that can be reused in the drilling solids purification system and recovers the drilling fluids lost from shale shaker and by derrick or screen block.

3. Normal wearing parts are replacable from the top of device; the belt is easily changed without having to remove any parts.

4. Interchangeable tungsten-carbide rotor blades and gear box prevent excessive erosion and minimizes the losses on main components.

GN factory exported to Asia,Africa,Europe,USA and so on, about more here,How to Correctly Order Shaker Screens from GN.at the same time ,you can call +86-316-5276966  5276969  5276970.