Recently 5 sets of GNZCQ360B vacuum degasser are ready for shipment to China drilling company. GN produced horizontal type vacuum degasser use the suction vacuum pump to create negative pressure in the vacuum tank, the drilling fluids enter the hollow shaft of the rotor through the suction tube under the action of the atmospheric pressure. And then the mud spray to the tank wall through surrounded windows of the hollow shaft. As collision and the function of separate wheel, the mud separated into thin layers, bubble immersed in the slurry breakup and gas escape. The vacuum pump is normally installed after shale shaker, but before mud cleaner feeding pump, to prevent the centrifugal pump impeller from damaged by the gas cut drilling fluids. The mud gas separator is another type of mud gas separator which is installed before drilling mud solids control system, to separate the hazardous gas from drilling fluids.
The model is GNZCQ360B, tank diameter is 920mm, capacity is less than 360m3/h, vacuum degree is -0.02~-0.04Mpa, the main motor is 37KW, the vacuum pump motor power is 7.5KW, rotation speed is 860rpm, the suction size and output size is DN150 and DN200, the pump is self suction pump without needing a feeding pump. The water ring vacuum pump help to discharge the gas out of tank. Except for GNZCQ360B vacuum pump, we also have GNZCQ270B vacuum pump, which with treating capacity 270m3/h, the main motor is 22KW, and vacuum pump power is 7.5KW, the rotary speed is 700rpm.
The main components of vacuum degasser including main motor, vacuum vessel, skid, vacuum pump, water gas separator, etc. If you need other solids control equipments except for vacuum degasser, pls contact with GN solids control, such as linear motion shale shaker, mud cleaner, desander, desilter, decanter centrifuge, mixing hopper, centrifugal pump, mud agitator, etc.