Recently one batch of drilling mud recycling unit and decanter centrifuges are ready for delivery to overseas client, including 2 sets of GNMS-500K drilling fluids recycling unit and 3 sets of GNLW364GT decanter centrifuge.
GNMS-500K drilling fluids recycling unit is economic type mud recycling system with treating capacity 500gpm. The technical configuration is as below:
Separation cut point 25 microns, total power is 25KW, and transferring tank volume is 3.4m3. With a mud cleaner GNZS754K-Y8N, adjustable G force ≤7.5 G, the top layer screen area 1.4m2, bottom layer screen area 1.4m2, 8ea of 4 inch desilter cone, desilter feeding pump GN100YZ100-30J. It is a compact design mud cleaning unit, which can be applied for trenchless HDD project, bored pile project, micro TBM, diamond drilling, water well drilling, etc.
Except for GNMS-500K drilling mud recycling unit, GN also produce GNMS-200K with treating capacity 200gpm, GNMS-1000K with treating capacity 1000gpm for drilling mud cleaning.
GNLW364GT decanter centrifuge is a 14 inch bowl T series dewatering decanter centrifuge, bowl length is 1520mm, bowl L/R ratio is 4.2, the max G force is 3200rpm, and max speed is 3964rpm, the T series decanter centrifuge bowl is interchangeable with Y series and C series bowl which is produced by GN solids control. The features is as below:
1. 8.5 degree beach angle to make the centrifuge cone section longer, so the drying and dewatering area is longer, which will improve the decanter centrifuge’s dewatering performance better, the discharged solids will be drier.
2. The centrifuge bowl is made of duplex stainless steel SS2205 or SS2304 by centrifugal casting, which is superior to the performance of SS304 and SS316L.
3. The screw propeller is protected by replaceable wear resistant alloy plate with longer service life
For more information of mud recycling unit and dewatering decanter centrifuge, pls contact with GN solids control.