Recently GN solids control shipped several units of solids control equipments for Uzbekistan for cold weather, these equipments are special for low temperature operation to -50℃.We have provided such low temperature solids control equipments to Russia area oil & gas drilling rigs before, including the containerized drilling waste management system. The technical configuration of low temperature containerized drilling waste management system is as below:
The feeding system to the drilling waste management system is through screw conveyor, it is transferred to the open top of the vertical cuttings dryer. One unit of vertical cuttings dryer installed on the mud tank, the discharged solids are dropped down to a continuously working screw conveyor to ship it out from the opening of the standard 40ft container. The fluids dropped to the mud tank and the screw pump will transfer it to the VFD decanter centrifuge ,which is also installed on a short mud tank, the fluids are treated by the VFD decanter centrifuge again and the solids discharged will be also transferred out by the screw conveyor for disposal. Another screw pump is installed on the vertical cuttings dryer mud tank as the flushing pump, once the working is finished, it is necessary to flush it or when the screen basket is blocking, it is necessary to flush with the flushing pump.
All the equipments are installed inside the 40ft container to keep the system warm in cold weather below minus zero degree, to prevent it from getting frozen. The 40ft container is with windows and doors for convenient operation, all the walls attached with the Insulation for better warm.
The solids control equipments including linear motion shale shaker, mud cleaner, decanter centrifuge for the drilling rig. If you need the low temperature solids control equipments, pls contact with GN solids control.