piling desanding unit

Recently 3 units of trenchless GNMS-500D desander unit for HDD project in China. The desander unit can be widely used for HDD, trenchless engineering, piling slurry cleaning, Micro TBM ( Tunnel Boring Machine), diamond core drilling, water well drilling. Depends on the piling bore hole qty and depth or HDD machine required flow rate, we can help our client to select proper model mud cleaning system or provide a customized solution for their projects.


The technical configuration of GNMS-500D desander unit is as below:
The general treating capacity is 500gpm, desander separation cut point is 40 microns, the mud cleaner model is GNZY753E-Y1S with 1 ea 10 inch desander cone, with vibration strength is below 7.1G ( adjustable), the bottom screen area is 1.35m2, top screen area is 0.875m2, total screen area is 2.22m2. The hydrocyclone feeding pump is GNSB5X4C-13(12)J with 30KW motor. Total power is 32KW, the inland shipping dimension is 3103x1896x2441mm, the operation dimension is 3506x1896x3907mm, total weight is 2850kgs.


The working principal of piling desander unit is as below:
The submersible slurry pump pick up the slurry from mud pit to bottom shaker screens of the double deck shale shaker to separate coarse solids from the slurry and protect the centrifugal pump impeller, the fluids dropped into the mud tank and the desander feeding pump feed the fluids to desander cone, the fluids after treatment will flow to storage tank through pipelines, the solids are dropped on the top layer shaker screen and separated out. The user need to prepare the flexible hose to connect the submersible slurry pump with the desander unit, and mixing unit with hopper, and a big storage tank.


Except for GNMS-500D desander unit, we also have other models, as GNMS-200D desander with 200gpm treating capacity, GNMS-1000D desander unit with 1000gpm capacity.

As a professional piling desander unit manufacturer in China, our desander unit has been widely used for bored piling project and TBM project in the world and domestic market. Recently we shipped 10 units of 500gpm desanding unit to Asia client. The configuration is as below:


1) 1 ea of 10 inch desander cone installed on the double deck shale shaker, the separation cut point is 40 microns.
2) The double deck shale shaker is installed on the V bottom mud tank, the feeding pump of the desander cone is installed on the mud tank as compact design.
3) No mixing hopper and mixing pump is included in the desanding unit, if the client need mud mixing unit, we will provide a separate jet mud mixer with a storage tank to connect with the desanding unit.
The working principal is as below:


1) The submersible slurry pump outside is feeding the bored piling or TBM slurry to the double deck shaker bottom screen, to separate the coarse solids from the slurry, the slurry is dropped into the mud tank, the centrifugal pump will transfer the slurry to the desander cone to separate the fine solids up to 45 microns. The double deck shale shaker can increase the treating capacity and better separation performance.
2) The clean fluids are flow to a separate mud tank for reuse, the user can connect the jet mud mixer with this tank to add chemicals and prepare for new fluids.
3) The centrifugal pump installed in the desander unit is produced by GN solids control, the pump head and all the parts are interchangeable with world famous brand centrifugal pump. The wear parts impeller, mechanical seal and pump casing is made of hard ductile iron alloy for better abrasion resistant.
If you need mud desander unit, pls contact with GN solids control.