mud system

GN Solids Control is the world famous solid control equipment and mud recycling system manufacturer, as its US subsidiary and North American headquarter, recently it released its new largest bowl decanter centrifuge-764 specially designed for the mud recycling system for large tunnel boring project.

553%e6%ad%a3%e9%9d%a2
The GNLW764A Decanter Centrifuge is the first generation of the large bowl for big volume of slurry separation. The bowl diameter is 30 inch and the ratio of the bowl length and diameter is up to 4.4. This will make the centrifuge to reach optimum separation and discharge cleaner liquid. And the large bowl size can guarantee the large processing capacity. The G force is up to 3000G when the bowl speed is at 2650 RPM. The torque of the gear box can be 25000N.M which will be used for heavy slurry separation. The bowl material is made from duplex stainless steel 2304 from centrifugal casting. The screw conveyor is made of stainless steel 304. The screw surface is protected by tungsten carbide tiles. And the solids discharge port is made from tungsten carbide inserts. The bearing is used with world famous SKF.  All the features of stainless steel, tungsten carbide tiles and bearing will make this equipment very reliable and need less maintenance during operation. The variable frequency drive is from ABB or SIEMENS. All the control system is operated by PLC Smart Control System with HMI visible operation interface. All the bearing temperature sensor, vibration sensor and over load protection are controlled by PLC automatically to protect the centrifuge from being damaged and make the centrifuge easy to operate. This centrifuge can also be working with the polymer dosing system to separate finer solids that are hardly separated by mechanical force. By working with the dosing system, the centrifuge can separate the find solid size almost to zero microns.

553%e8%83%8c%e9%9d%a2
If you are interested in this new largest centrifuge, welcome to visit our website www.gnsolidsamerica.com and get more information, please send your inquiries to USA@gnsolidscontrol.com .

GN Solids Control is an international company with its solid control and waste management business spanning all around the world. Established in 2007 in China, it’s always striving to provide the good quality product to the customer and help them saving cost. In 2014, GN Solids Control subsequently established its overseas office in US and Russia, to better serve the local customer and provide them the quick delivery and excellent after sales service. Now GN not only manufacture every single solid control equipment, but also can provide the customers with solutions and solid control system.GN-Liquid-Mud-Plant-1
The liquid mud plant is one of its systems which mainly used in onshore or offshore to keep the mud properties as good as possible during the mud is circulating in the wellbore. The liquid mud plant is mainly composed of the following equipment, shale shaker, mud agitator, mud gun, centrifugal pump, mud mixing hopper, decanter centrifuge and various kinds of mud tanks. The type of mud tanks includes oil based mud tank, water based mud tank, base oil tank, barite tank, water tank, mud mixing tank and bulk tank. Each tank has its own special functions and will be deployed in different operation situations. Now GN can design and make different shapes and sizes of tanks, such as the round tank, vertical tank and rectangular tanks. The different sizes of liquid mud plants will apply the different sizes of tanks. The liquid mud plant is used to mix, dilute, treat, and adjust different kind of drilling fluids and make sure the fluids can meet the drilling standard and applied great into the well.GN-Liquid-Mud-Plant-2
That’s the basic introduction of the liquid mud plant. Hopefully it will be useful to you. GN has many more solid control systems, they can be used in different operational situations and help you achieve your target easily and cost effectively. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to USA@gnsolidscontrol.com

The
solids control system could eliminate the large solid particles within the
drilling mud to reduce the particular solids content so that to guard the
transferring pump which used to transfer the mud back the rig with regard to
reusing. GN just done one set mud solids control system with VFD
decanter centrifuge
for gold mining project in Southeast Okazaki, japan.
This system is a 3 stages separation design model; the equipment configuration
is as beneath:
1 . Shale shaker unit GNZS594E-HB used for coarse strong particle separation.
This shale shaker unit could also be employed as a high G pressure drying
shaker
with variable G force up to 7. 4-panel screen makes a bigger area
for drying the actual drilling mud.
2 . VFD design decanter centrifuge device used for fine solids splitting up.
The first one unit centrifuge goes at a middle speed to eliminate most of the
solids to reduce the particular gravity. The following second system VFD
control centrifuge might run at a high speed to get rid of the ultra fine solids
to make the drilling mud
cleaner
.

3. Screw pump set up to transfer the mud to the centrifuge. Horizontally put in
at the flank of the tank, it helps to tank leading more space for operation
mobility.
4. Mud catching tank
used as sand snare and active mud safe-keeping.
This system is to get rid of the solid particles in the going mud to make the
drilling essential fluids reuse. After the solids currently being removed, the
fluids may be pumped back for recycle and the pump would be
additionally protected as there are less solids particles.
Mud solids control system is very common merchandise and solution that GN
provides. For this purpose, GN might provide separation system intended for oil
drilling, no drill down drilling project and some different industrial solid
and chemical phase separation. For more information, delightful send us email
or even call with no hesitate. 

Related Posts

GN Sales team and one set of GNLW363BG Decanter Centrifuge hadattend Nigeria Oil Show in ICC Center in Abuja, Capital of Nigeria last week
and now GN Sales team was back from Africa and the above mentioned decanter
centrifuge was left there, sold to a customer whose main business is oil and
gas drilling waste management.

Although the crude oil price has dropped to
a historically low place, and as a country whose 70% income comes from oil,
Nigeria’s currency Naira’s value is lower than before, this Oil Show held in
Abuja still attracted lots of visitors from domestic and outside Nigeria. Abuja’s
ICC Center is located in the center city, at the first day of Oil Show, the
country’s most important political and economical leaders had attended the
Show.

Many local companies and companies from
abroad who have branch companies attended this show, comparing with their fancy
stands well decorated, GN’s stand was a bit plain. But GN was the only Chinese
company who brought with it a real product, a Decanter Centrifuge GNLW363BG. Its
shining bowl made of SS2205 attracted many visitors’ eyeballs. Many waste
management service providers showed their interest in GN’s standard waste
management system combined with GNCD930 Vertical cuttings dryer and GNLW363BG
Decanter centrifuge.

If you missed Abuja Oil Show, don’t worry.
In the coming week, GN will show the newest designed equipments and systems in
CIPPE Beijing and in May, in OTC in Houston.

What GN will show in CIPPE:

1.      
Complete series of GNLW
Decanter centrifuges, GNLW363CG-VFD, GNLW452, GNLW223, GNLW553.

2.      
GN standard waste management
system, combined by GNCD930 Vertical cuttings dryer and GNLW363CG Decanter
centrifuge, with skid and tank.

3.      
GN 500 GPM mud system for HDD
project.

4.      
All GN main equipments used for
Oil and Gas drilling solids control system including shale shaker, mud cleaner,
vacuum degasser and etc.

Related Arciels:

GN Solids America, a manufacturer of drilling mud system plans to commence operations in the United States with the establishment of a 3,000 square foot warehouse, along with 1000 square feet of indoor space which will stock the top selling  driling mud tank system . We plan to have a growing team which will include, among others, sales and service engineers, managers and executives for our drilling waste management and drilling mud system business in America and Canada, and develop it to cover our business operations in Latin America.

Oil & Gas Drilling Industry business

Solids Control & Waste Management Equipment

Customer

Drilling Rig Manufacturer

Drilling contractor

Oilfield Service company

Civil & Underground Industry Business

Drilling Mud Recycling System

GN Drilling Mud System Customer

Drilling Rig Manufacturer

Drilling contractor

Mud Service companies

Mining & Industrial

Slurry Separation Plant

Drilling Mud Recycling system

Mining Exploration Company

Dredging company

Dredging Machine Manufacturer