disc stack separator

1 unit of GNSD-90 disc stack separator and 1 unit of GNLW-454ET decanter centrifuge are shipped to our domestic client. These equipments are for separation of oil ,water and solids.
The working process is as below:

The decanter centrifuge feed pump transfer the oil sludge to decanter centrifuge feed tube, in the meanwhile, the dewatering unit mixed the proper chemicals, the chemical dosing pump transfer the chemicals to static mixer and then to decanter centrifuge feed tube, the mixing oil sludge and chemicals are mixed well, so it will be easily to be separated out by decanter centrifuge, the solids size bigger than 2 microns will be separated out, the oil and water mixture fluids will flow to buffer tank, then feed to disc stack separator, to separate oil, water and little solids. The mixture fluids feed to disc centrifuge must be with solids content less than 3%, otherwise it will block the disc stack separator easily.
The technical specification is as below:
GNLW-454ET decanter centrifuge with bowl diameter 18 inch(450mm) , bowl length 74.5 inch (1890mm), max speed is 3500rpm, max G force is 3084G, bowl L/R ratio is 4.2, the main motor and back drive motor will be suggested by our engineer according to client’s material. The handling capacity will be also depend on the chemical to be used and treated material.

GNSD-90 disc stack separator for oil, water, solids separation:
Bowl diameter is 580mm, slide piston is 500mm, the max speed is 6150rpm, max G force is 12273G, motor power is 18.5KW, the starting time is 10 to 15 minutes, the major components of the disc stack separator is the bowl, the process effect is obtained by the rotating drum with high speed.
Except for decanter centrifuge and disc stack separator, to treat oil sludge, the user also need other accessories, pls contact with GN solids control for more information.