Tag: solids vacuum pump

GN Mute Solids Vacuum Pump for Tunneling Slurry Transfer

Recently a unit of mute solids vacuum pump are ready for shipment, it will be used for tunneling slurry transfer. The vacuum pump is used to suck the slurry used for Tunneling project and discharge to another place, the max suction distance is 50m horizontally, max discharge distance is up to 1000m horizontally. The vertical lifting depth is up to different materials. The max solids content allowed is 80%, and max solids size can be pumped is up to 75mm, it can be used to transfer tunneling slurry, especially for long distance transfer. Since the vacuum pump is 100% air operated pump, no need electricity supply, it is suitable for hazardous area application. When the vacuum pump is installed near city center, a mute tank is applied to reduce the noise.


Tunneling slurry is a mixture of topsoil, Portland cement, and water. The consistency of the slurry is different depending on its purpose in a repair project. The slurry is made thinner and more watery for filling purposes and thicker with less water for lifting purposes. In foundation repair and tunneling, slurry is used as a filling material and is of a thinner consistency.


We have 3 models of solids vacuum pump for option with different flow rate, GNSP-10B with flow rate max 10m3/h, GNSP-20B with max flow rate 20m3/h, GNSP-40B with max flow rate 40m3/h. There are automatic mode working and manual mode working for option based on different working conditions. After several times testing for suction time and discharge time, the user can adjust the timers of suction and discharge until it reach your requirement.
It can be widely used to transfer waste mud, drilling cuttings, oil sludge, tunneling slurry, animal waste, hazardous waste, sand and solids, etc. material. If you need solids vacuum pump, pls contact GN solids control.

Waste Pit Cleaning Vacuum Pump and Centrifuge for Asia Client

One unit of waste pit cleaning vacuum pump and decanter centrifuge are ready for shipment to Asia client. The working process is that the solids vacuum pump suck the waste sludge from waste pit, and dilute it with water and agitating, then the slurry is feed to decanter centrifuge for dewatering process. The mechanical separation of decanter centrifuge cut point is 2~5 microns, with chemical dosing unit, the separation performance will be improved.


For the waste sludge which with high solids content and high viscosity, it can not be treated by decanter centrifuge directly due to the limit of centrifuge feeding tube. The solids content should be reduced by dilution the sludge by water in the mud mixing tank, if necessary, heating process should be applied to reduce the viscosity.
The vacuum pump main components including tank and base assembly, lifting frame, slurry pipe assembly, suction pipe assy, inlet pipe assy, intake pipe assy, control panel assy, knife gate valve, pneumatic bufferfly valve, air discharge pipe assy, etc. The user will prepare for suction hose and discharge hose according to their suction distance and discharge distance, and also need an air compressor for air supply to solids vacuum pump. For more details of air compressor, pls contact with GN solids control. The user can select automatic motion or manual motion according to the material condition. Under automatic operation mode, the timer of suction and discharge can be set as per experience, the user can adjust it according to mud density, viscosity, suction and discharge distance.


The centrifuge feeding pump is installed on the mud mixing tank and feed the mixed slurry to decanter centrifuge, the progressive cavity pump is normally used as centrifuge feeding pump, for reliable operation and easily adjustment of feed rate, which can be controlled by decanter centrifuge VFD control panel.

Mini Solids Pump and Mini shaker for South America Customer

Mini solids vacuum pump and mini shaker are ready for shipment to South America customer. The mini solids vacuum pump is designed convenient movable for flexible operation. There are automatic mode or manual mode for user’s selection. If automatic mode is selected, running the vacuum pump for several loops then set the timer according to the experience to fit the material condition, the running time can be adjusted and controlled by 2 pneumatic timers. If manual mode is selected, the user need to discharge empty the cavity manually. Before delivery, the timers are set at 10s suction and 10s discharge. If the cavity is full very quickly, just reduce the suction time. Conversely, longer the suction time.
The working procedure when manual mode is selected.

Connect to air supply and select manual mode.

Switch the knob to discharge position to empty the cavity.

Put suction inlet pipe into the material, switch the knob to suction position.

If cavity is almost full, switch the knob to discharge position again.
The mini vacuum pump can be used to transfer material with high solids content, and it can be used to transfer powder material such as sand, dust. It also can be used to clean fluids from drill floor, decks, pipe racks, mud rooms and drains, tanks and mud spill.


The mini shale shaker model number is GNZS752-DZ, the screen panel is 2pcs , and screen size is 750x900mm, screen area is 1.35m2, which is drived by 2ea 1.0KW vibration motor. The G force is adjustable and up to 7.5G, the deck angle is +2º. Polyurethane material screen or composite material frame shaker screen can be installed on the shale shaker. The mini shaker is widely used to separate solids from liquid by using different mesh size shaker screen.

GN will participate in CIPPE 2022 Petroleum Exhibition in Shenzhen

GN solids control will participate in CIPPE 2022 Petroleum Exhibition held in Shenzhen, for more information of the exhibition, pls refer to http://www.cippe.com.cn/cn/
General information of CIPPE 2022 Petroleum exhibition：
Exhibition Name：The 22nd China International Petroleum & Petrochemical (CIPPE)
Exhibition time： Early August, 2022 ( pls check with GN solids sales for exact time)
Exhibition address：Shenzhen Convention and Exhibition Center (Futian)
GN Stand No.：E1226
What equipments we will show at CIPPE?

Linear motion shale shaker with ViST screen, ViST vacuum screen technology is to work together with shale shaker, the function is to reduce drilling waste and recycle drilling fluids. In a result, ViST maximize the recycled drilling fluids volume and generates dryer cuttings. By applied with ViST, the user can save money for drilling fluids and waste management.

Decanter Centrifuge, GN produced decanter centrifuge can be applied to waste water treatment, solids control system drilling fluids treatment, drilling waste treatment, oil waste treatment and other solids liquid separation projects. We can produce decanter centrifuge from 9 inch to 30 inch bowl diameter, according to client’s requirement, we can produce fixed speed or variable frequency drive control panel.

Vertical cuttings dryer, one of the most popular model is GNCD930 vertical cuttings dryer, the lastest version is G version, we have updated the design according to user’s feedback and technology improvement.

Solids vacuum pump, the 100% air operated vacuum pump can be used at hazardous area and electricity limited area. The compact design of the vacuum pump allowed it to be installed inside the oil tank for easier picking up of the oil sludge from tank bottom, without needing people entry. The solids vacuum pump can transfer different kinds of materials, such as dredging slurry, oil sludge, material with solids content up to 80%, material with big solids up to 75mm.
Welcome to meet us at CIPPE.

Mini Solids Vacuum Pump and Mini Decanter Centrifuge for International Customer

Recently one unit of mini solids vacuum pump and mini decanter centrifuge are ready for shipment for international customer. The mini solids vacuum pump is used for tank cleaning application, the mini decanter centrifuge is used for solids liquid separation.
GN solids control can produce vacuum pump with different flow rate, we have GNSP-40B, GNSP-20B, GNSP-10B for option, also we have GNSP-05B as Mini bilge cleaning sludge vacuum pump. The technical specification is as below:


Max flow rate is 5m3/h for clear water, inlet and outlet size is 2 inch and air intake hose size is 1 inch, the vacuum degree is 85Kpa/25 inch HG( Mercury Column), the discharge head is 80m and pressure is 116PSI. The max horizontal discharge distance is 500m. The max solids content is 80%, and max solids size allowed to be sucked is 30mm.The pressure required is 550 ~ 690 Kpa and air demand is 4.3 m3/min ( 150 CFM). The mini vacuum pump can be used for the cleaning of residual waste inside the cabin and the transportation of loose materials. The higher flow rate vacuum pump can be used to transfer drilling waste, oil waste, crude oil tank bottom cleaning sludge, oil sludge, sand, contaminated soil and other sludge, especially it is 100% air operated pump which can be safely used in electricity limited area.


The mini decanter centrifuge with 9 inch centrifuge bowl, we have different models for different applications. GNLW223D baby decanter centrifuge with bowl length 26.4 inch, it can be widely used for diamond core drilling waste water treatment. If the user need a higher treating capacity and need the discharged water more clear, they can select a longer bowl length 36.4 inch, GNLW224ET-VFD.
If you need mini decanter centrifuge for solids liquid separation, pls contact with GN solids control.