GN solids America

It is always being good to have duplicated orders from
client, this implies a lot. Just as our own regular decisions, if we are not
pleased with some products, we will go for another one. There are too many
alternatives, this is the third drilling
cuttings dryer system
for this identical client. As we know, Russia going
operation normally under cold weather, this need the gear to specially designed
for cold weather.

The Main Equipment for this job include following:
1) 1 Containerized Vertical cuttings Dryer system with winterization
2) 3 Screw Conveyor, a couple of for feeding the cuttings dryer, one for launch
drilling cuttings from the dryer.
3) Two sets decanter
centrifuge
with one VFD and one fixed speed. These two decanter centrifuge
is actually on the solids control tank, but they are for handling thedrilling mud
from solids control tank as well as the drilling body fluids discharged from
the cuttings dryer.
4) 3 screw pumping systems, one for cuttings dryer flushing, the other two with
regard to feeding the centrifuges.
Therefore except lower down the price, this is the way we survive in the
unpleasant time. Can not say we now have how many fans, but GN Solids Control now already have
a lot of buyers support, with their advise, using sticking to GN brand, GN is
getting better and far better now.

The
solids control system could eliminate the large solid particles within the
drilling mud to reduce the particular solids content so that to guard the
transferring pump which used to transfer the mud back the rig with regard to
reusing. GN just done one set mud solids control system with VFD
decanter centrifuge
for gold mining project in Southeast Okazaki, japan.
This system is a 3 stages separation design model; the equipment configuration
is as beneath:
1 . Shale shaker unit GNZS594E-HB used for coarse strong particle separation.
This shale shaker unit could also be employed as a high G pressure drying
shaker
with variable G force up to 7. 4-panel screen makes a bigger area
for drying the actual drilling mud.
2 . VFD design decanter centrifuge device used for fine solids splitting up.
The first one unit centrifuge goes at a middle speed to eliminate most of the
solids to reduce the particular gravity. The following second system VFD
control centrifuge might run at a high speed to get rid of the ultra fine solids
to make the drilling mud
cleaner
.

3. Screw pump set up to transfer the mud to the centrifuge. Horizontally put in
at the flank of the tank, it helps to tank leading more space for operation
mobility.
4. Mud catching tank
used as sand snare and active mud safe-keeping.
This system is to get rid of the solid particles in the going mud to make the
drilling essential fluids reuse. After the solids currently being removed, the
fluids may be pumped back for recycle and the pump would be
additionally protected as there are less solids particles.
Mud solids control system is very common merchandise and solution that GN
provides. For this purpose, GN might provide separation system intended for oil
drilling, no drill down drilling project and some different industrial solid
and chemical phase separation. For more information, delightful send us email
or even call with no hesitate. 

Related Posts