Author: gnadmin

Spring Season, Welcome to Visit GN Solids Control Tangshan Factory

GN Solids Control move to the new third factory to Tangshan in 2023, welcome all the friends, clients from domestic and abroad to visit GN new Tangshan factory in the bright spring season.


This is GN third new factory since the first factory and second factory in Langfang city, also GN Solids Australia is established in 2023 after GN Solids America established in 2023 in Houston, TX.


We will show you around GN separation facility, to introduce our comprehensive range of equipments and separation solutions for different industries and projects for your separation requirement, such as oil and gas industry, mining separation industry, trenchless engineering & construction. Our main products line including:


Solids control equipments & system, as linear motion shale shaker, linear motion mud cleaner, desander, desilter, vacuum degasser, decanter centrifuge, mud gas separator, centrifugal pump, mud agitator, mud gun, mud tank, mixing hopper, shaker screens, submersible slurry pump, etc.
Drilling waste management equipments & system, vertical cuttings dyer, waste decanter centrifuge, high G drying shaker, screw conveyor, sludge vacuum pump


Oil sludge treatment plant
HDD & CBM mud recycling system with 200gpm, 400gpm, 600gpm,800gpm,1000 gpm,1500gpm treating capacity
TBM &Piling slurry separation plant
Mining slurry separation plant
Waste water treatment unit
Dewatering unit with dewatering centrifuge
Mining separation vibrating screen


We will also show our Blanking workshop, welding workshop, CNC machining workshop, Coating workshop, Assembly workshop, outdoor assembly area, office building, our robot welding production line , painting and powder coating production line will be introduced.
During your visit, we will study your customized requirement and provide customized solution for your project, our professional sales engineer team will provide the best pre-sales consulting, after-sales service and good quality equipments & solutions. Also we will take this opportunity to show you our advanced technology and equipments.
Welcome to visit GN solids control in Spring.

Mini Desander and Desilter for Africa Drilling Company

Recently one batch of mini desander and mini desilter are ready for shipment to Africa drilling company. The technical configuration is as below:


The mini desander unit consists of 2ea 10 inch desander cone and mini bottom shaker drived by explosion proof vibration motor. GN own produced composite material frame shaker screen are produced comply with API RP13C standard. The mini desilter cone consists of 16ea 4 inch desilter cone with mini bottom shaker.
Generally, the combination of hydrocyclones above 6 ″is called desander, which is a secondary solid control equipment in drilling operations. 10”and 12”cones are commonly used to separate the particle size of drilling fluid from 44-74μm solid particles.
Compared with the desander and desilter without bottom shaker, the mini desander unit and mini desilter unit with bottom shaker can recycle more drilling fluids and dry the drilling cuttings, it can be installed after primary shale shaker on the solids control system.


Except for mini desander unit and mini desilter unit, GN also produce desander, desilter and bottom shaker 3 in 1 mud cleaner. By use different qty desander cone and desilter cone, the mud cleaner with 500gpm, 1000 gpm, 1500gpm treating capacity.
Features of GN mini desander, mini desilter, mud cleaners are as below:
1. Composite material frame screen and wedge type screen pressing device are applied for fast screen replacement.
2. International brand vibration motor , Martin motor or OLI motor is adopted.
3. International famous brand electrical components, Siemens or Schneider components.
4. The shaker deck bottom with a patented sealing design, with good sealing effect, long service life and easy replacement.
5. The shaker deck angle is adjustable mechanically synchronously, which is convenient and reliable.
For more information of mini desander unit, mini desilter unit and mud cleaner, pls contact with GN Solids Control.

Drilling Mud Centrifugal Pump and Mud Agitator for Africa Client

Recently one batch of drilling mud centrifugal pump and mud agitators are ready to ship to Africa client.
The drilling mud centrifugal pump can be used as drilling mud transfer pump, mud pump charging pump, trip pump, desander desilter feeding pump, water pump, mixing pump, etc., we produced different model drilling mud centrifugal pump for different flow rate and lifting head.


The mud agitator consists of heavy duty gearbox and explosion proof motor, which is connected directly, it will be installed on top of mud tank for drilling mud agitating, to prevent the solids deposition in the drilling fluids circulation system, to ensure stable performance and uniform mixing of drilling fluids.
Features of GN G version mud agitator:
1. The helical bevel type heavy duty gearbox runs smoothly with less noise.
2. The motor is directly connected to the input shaft of the gearbox without belt transmission, the speed of the mixing impeller is constant.
3. Compact foorprint and reliable operation.
4. High mixing strength and wide agitating range, avoiding the phenomenon of current overload when the motor starts.
5. Including agitator shaft, double or single layer impeller, stabilizer
6. Except for direct connected G version mud agiator, GN also produce coupler type E version mud agitator, vertical type mud agitator.
The selection of motor power and impeller is usually determined based on the following points:


a. Mud tank type – cylinder or rectangle
b. Mud Tank size
c. Mud specific gravity
d. Rotation speed ratio
After collecting relevant information, we will select the mud agitator proper model and confirm motor power, shaft length, and impeller.
If you need more solids control equipments for mud tank system, such as mud mixing hopper, mud gun, submersible slurry pump, screw pump, shale shaker, mud cleaner, decanter centrifuge, vacuum degasser, pls contact with GN solids sales engineer.

GN Solids Control attended 2024 Beijing CIPPE Oil Equipment Show

This week GN solids control attend 2024 CIPPE oil show in Beijing. As one of the professional oil exhibition in China, we participate in CIPPE oil exhibition every year, to show our most advanced technology and equipments and meet with clients from domestic and worldwide.


This year we showed the equipments as below:
1. ViST vacuum screen technology to work with 4 panel shale shaker for drilling fluids recovery and reduce drilling waste, it can save money for operation on drilling fluids and drilling waste management. The ViST pan is installed under the last screen and connected to ViST vacuum unit. The air compressor or rig air supply should be provided to create suction on the last screen surface, it can reduce the liquid on the cuttings by 30% ~50%.


2. Sludge vacuum pump and vacuum cleaner, GNSP40B & GNSP10B, it is 100% air operated, no need electric power, suitable for hazardous area application, it can be used to transfer liquid, wet sludge and solids, it can transfer solids size Maximum 50mm or 75mm, sludge solids content up to 80%.


3. Vertical cuttings dryer GNCD930G-VFD
4. GNLW363D-VFD decanter centrifuge, it is the most popular model used for drilling fluids treatment, dewatering unit, mining tailings separation, etc.


5. GNLW554FT-VFD Decanter centrifuge
6. Screw conveyor GNSC14-12B with gratings cover, and addtional safety features: Full Length Safety Grab Wires along the auger, we could offer CNEX, ATEX, IEC EX for options.
7. 3 phase decanter centrifuge GNLWS364FT-VFD, it can be used to separate oil, solids and water. It is the major equipment for oil sludge separation system.


8. Shaker screens
9. 3 phase disc separator GNSD90, it can be used to separate oil, solids and water.
10. For more information of solids control equipments and drilling waste management equipments, pls contact with GN solids sales.

GN will show Second Generation 3 Phase Decanter Centrifuge at 2024 CIPPE Exhibition

GN solids control is going to participate in CIPPE 2024 exhibition next week, we will show the second generation three phase decanter centrifuge during the show. If you are interested in the 3 phase decanter centrifuge and want to know more information, welcome to visit GN stand at CIPPE 2024.
The exhibition information is as below:


Exhibition Name: The 24th China International Petroleum & Petrochemical Technology and Equipment Exhibition（CIPPE 2024）
Exhibition time: 25th-27th, March, 2024,
GN Booth No.: E2168
After moving to the new 80000m2 new facility, GN introduced new advanced machines and technologies, to develop more new equipments with new technology, the 3 phase decanter centrifuge is also updated according to our experience with clients. The 3 phase decanter centrifuge is widely used for oil sludge separation projects to separate oil, water, solids. The separation is flexible for different liquid phase proportion. The operator can use the adjustable impeller to adjust the pond depth of the heavy liquid conveniently during working. An adjustment mechanism causes the position of the impeller to change.


The bowl material is duplex stainless steel SS2205, the screw conveyor is made of duplex stainless steel SS2205, the screw propeller is protected by tungsten carbide tiles, the material distribution port and solids discharged port are protected by tungsten carbide insert, the bearing is made from SKF or NSK brand, the gearbox is planetary wheel type gearbox.
Except for the 3 phase decanter centrifuge, GN will also show ViST 4 panel shale shaker with electric driven vacuum unit, 14” decanter centrifuge with VFD system, GNLW554FT-VFD big bowl big volume decanter centrifuge for industrial waste treatment, 3 phase disc stack separator for oil sludge separation system, vertical cuttings dryer, vacuum pump GNSP-10B and GNSP-40B, screw conveyor GNSC14-12B, etc. For more details, pls contact with GN solids sales.